Why You Need This Motion Sensor Light ?
Do you have such troubles? You feel very inconvenient since there\'s no enough light in some small areas and corners such as wardrobe, cupboard, closet and drawers.
-It\'s expensive and complicated to find a electrician to rewiring for light installation;
-You can\'t liberate your hands with a flashlight while you try to find something;
-Some nightlights need to change battery constantly;
-You have to groping the switch in the dark to turn it on. And have to remember to turn off when you leave....
Now our PIR induction lamp can solve above problems perfectly!
This sensor light is super easy to install. No wire, no tools required.
They come with a magnet and metal strips with 3M sticky pads. Use the 3M adhesive pad to stick the metal strip where you\'d like the light then the adhesive magnet pad to stick to the back of the light (extra 3M and metal strip provided).
Hands free, auto on and off at AUTO mode in the dark.
There are three settings: On/Off/Auto. When on the auto settings the lights will come on when movement is detected in the dark and the light goes off after 15 seconds of no motion so it doesn\'t waste the charge. There is also a choice of constant light, which makes it possible to use as a night light.
High capacity rechargeable battery
USB charging, can be used up to 14 hours at \"ON\" mode and 3 months at \"AUTO\" mode for one single charge.
Sensor Type: Dual Motion & Light Sensor
Detection range: 10ft / 3m
Motion angle: 120°
Product Dimension: 15*3*1.5cm / 5.9*1.18*0.59inch
Product Weight: 45g
1 x Motion sensor Light
1 x Charger cable (USB wall plug not include)
2 x Strips of metal
2 x Double-sided adhesive strips
1 x Adhesive magnet strips
1 x User manual