Product parameters:\r\n Power: 100W\r\n Input voltage: 90-120V; 180-240V\r\n Power factor: PF≥0.9\r\n Light source: SMD2835/ 1W/ 9V/ 144 led\r\n Color temperature: 6000K\r\n Function: radar sensor light control\r\n Waterproof rating: IP65\r\n Material: metal shell glass\r\n Shell color: black\r\n Use scenario: suitable for garages, corridors, parking lots, stairwells, courtyards, corridors\r\n Accessories: Floodlight*1/ Ground rod*1/ Remote control*1/ Manual*1\r\n\r\n Instructions for use:\r\n The test lights are initialized for about 5 seconds after the power is turned on, which is a normal phenomenon, and then enters the monitoring state; when there is no object moving in the monitoring area, the light will not turn on after a delay of 15-30 seconds. The sensing surface (a top view with a hole) should face the hemispherical area of ​​detection sensing, that is, it should face the moving passage of people or objects, and the surface cannot be covered by metal plates or other metal materials, otherwise the distance will be shortened or malfunction. It is recommended to install the two switches more than 2 meters, the sensing surface cannot be opposite to each other, and the sensing distance is 8-10 meters.\r\n\r\n Features:\r\n 1. Ultra-thin, light and easy to install.\r\n 2. Long projection range and wide range.\r\n 3. Adopting alloy casting technology, better heat dissipation and effectively prolong the service life of the light source.\r\n 4. Adopt super bright LED lamp (light source): high brightness, low energy consumption, long life and other advantages.\r\n 5. Adopting radar sensor control, the sensitivity is higher and the sensing distance is longer.\r\n\r\n Precautions:\r\n 1. When installing and repairing the LED flood light, please cut off the power first.\r\n 2. To ensure the safe use of LED floodlights, the lamps must be well grounded.\r\n 3. Before installation, please pay attention to check whether the voltage marked on the lamp is consistent wit