Vanity Mirror Makeup Lamp, KeepTpeeK 10 Bulbs Vanity 3 Color Lighting Modes Brightness Dimmable USB Charge LED Mirror Light for Bedroom Makeup Vanity Table
Price: $19.99
Description
Features:
Material: ABS Lamp Holder and PC Lampshade
Color: White
Quantity: 10 Bulbs
Power Supply: Standard USB 5V 2A or above
LED Colour Temperature: 3000K, 4500K and 6500K
Power: A single lamp maximum power is 0.8W
Protection Level: IP43
Bulb Size: 45x45x51mm /1.77\"x1.77\"x2.01\"
Length(between bulb and bulb): 33cm /12.99\".
Installation steps:
1.Cosmetic mirror or be installed surface treatment: should be sticky surface should be dry, clean, and no rust, oxidation, grease, dust and other pollutants.
2.According to the design of the number of mirrors and bulbs, each bulb installation location, note the lamp spacing of up to 33cm, the minimum spacing of about 15cm.
3.Remove the product to determine the power and control switch to place the seat is appropriate the first light paste location(with the control switch to connect the first line).
4.The bottom of the product is double-side adhesive tape tear off the film, and then affixed to the first lamp position, forced down, so that double side adhesive is pasted better. Make the tape and the bonding surface get full contact.
5.When you use the lights, you can adjust the color temperature and the brightness with the function buttons. And choose your favorite color!
Package Included:
1 x LED Mirror Light (not included other decorations)
1 x Sticker
1 x English User Manual
Material: ABS Lamp Holder and PC Lampshade
Color: White
Quantity: 10 Bulbs
Power Supply: Standard USB 5V 2A or above
LED Colour Temperature: 3000K, 4500K and 6500K
Power: A single lamp maximum power is 0.8W
Protection Level: IP43
Bulb Size: 45x45x51mm /1.77\"x1.77\"x2.01\"
Length(between bulb and bulb): 33cm /12.99\".
Installation steps:
1.Cosmetic mirror or be installed surface treatment: should be sticky surface should be dry, clean, and no rust, oxidation, grease, dust and other pollutants.
2.According to the design of the number of mirrors and bulbs, each bulb installation location, note the lamp spacing of up to 33cm, the minimum spacing of about 15cm.
3.Remove the product to determine the power and control switch to place the seat is appropriate the first light paste location(with the control switch to connect the first line).
4.The bottom of the product is double-side adhesive tape tear off the film, and then affixed to the first lamp position, forced down, so that double side adhesive is pasted better. Make the tape and the bonding surface get full contact.
5.When you use the lights, you can adjust the color temperature and the brightness with the function buttons. And choose your favorite color!
Package Included:
1 x LED Mirror Light (not included other decorations)
1 x Sticker
1 x English User Manual